The Mi-TIC E L thermal imager with an oversized display- an affordable interior structural firefighting camera.
The argus® Mi-TIC E L is the most affordable high resolution large screen thermal imager for fire fighting applications. The camera provides a crystal clear image with dynamic range up to 1400ºF (760ºC) and at the same time see very low temperature objects, which is ideal for casualty searches.
The argus® Mi-TIC E L is available with a unique dual use desktop/in-truck charger station which securely retains and charges both the thermal imager and a spare battery.
Applications include
• Ventilation location selection
• Search and Rescue (Fire and Non Fire)
• Seat of fire localization
• Size Up
• Identify residual heat during overhaul operations
Technical Data | ||
---|---|---|
ENVIRONMENTAL DATA | ||
Thermal conditions | The camera has been designed to operate: • continuously between -20°C (-4°F) and +85°C (185°F) or • 150°C (300°F) for 15 minutes • 250°C (500°F) for 5 minutes |
|
Sealing | IP67, will withstand immersion in water | |
Impact | The camera will withstand a drop from a height of 2m (78 inches) onto concrete | |
Storage | It is recommended that for maximum effective operational life, the storage temperature is kept between -20°C (-4°F) and +40°C (104°F) | |
OPTICAL DATA | ||
DETECTOR | ||
Sensor type | Un-cooled Microbolometer | |
Sensor material | Amorphous silicon (ASi) | |
Resolution | 384 x 288px | |
Pixel size | 17µm | |
Spectral response | 7.5 - 14µm | |
MDTD (Full camera system sensitivity) | 50mK (0.05°C) typical (Minimum Discernible Temperature Difference) | |
NETD (Sensor sensitivity) | <50mK (<0.05°C) | |
Dynamic range | -40°C to 760°C (-40°F to 1400°F) | |
Refresh rate | 60 Hz | |
Direct Temperature Measurement (DTM) | -40°C to 760°C (-40°F to 1400°F) | |
LENS | ||
Lens material | Germanium Composite | |
Focal length | 1m to infinity, optimized at 4m (3ft to infinity, optimized at 13ft) | |
Aperture | f/1.0 | |
Field of View | 50° horizontal, 37.5° vertical, 62° diagonal | |
DISPLAY | ||
Type | High grade, Industrial, colour TFT active matrix LCD | |
Size | 90mm (3.5 inches) | |
Pixel format | QVGA 320 x 240, (each pixel RGB format, total pixels 230,400 pixels) | |
Video input | Sensor synchronised direct digital drive | |
Backlight | 350cd/m2 | |
MECHANICAL DATA | ||
Camera dims (H X W X D) | 216mm x 110mm x 82mm (81⁄2 X 45⁄16 X 31⁄4 inches) |
|
Camera weight | 700g (25 oz) without battery 865g (31 oz) with std battery 960g (34 oz) with high capacity battery |
|
Battery dims (H X W X D) | 87mm x 76mm x 28mm (std battery) 87mm x 76mm x 35mm (high capacity battery) |
|
Battery weight | 165g (6oz) (std battery) 255 (9oz) (high capacity battery) |
|
Charger dims (H X W X D) | 167mm x 112mm x 120mm | |
Charger weight | 550g (1 lb and 3 oz) | |
Main camera body | Radel®R-5100 and Santoprene® | |
LCD window | Ultrason® E 2010 HC | |
LCD bumper | Santoprene® | |
Ge Window collar | Radel®R-5100 and Santoprene® | |
Lens window | Germanium (2mm thick) with durable coating | |
ELECTRICAL DATA | ||
Power consumption | <3 W typical | |
Start-up time | 5 seconds typical | |
Battery type | Lithium Iron Phosphate Rechargeable Battery | |
Battery capacity | 1500 mAh, 6.6V (std battery); 2500mAh, 6.6V (high capacity battery) | |
Std Battery life | In excess of 3 hrs @ ambient temperature (22°C, 72°F) | |
Std Battery charge time | Less than 3 hours | |
High Capacity Battery Life | In excess of 5 hrs @ ambient temperature (22°C, 72°F) | |
High Capacity Battery charge time | Less than 4.5 hours | |
Battery recharge cycles | Over 2,000 cycles | |
Battery charging temp. | 5°C to 40°C (41°F to 104°F) | |
Charger input voltage | 11V - 30V DC (12V and 24V vehicle systems) | |
Charger operating temp. | 0°C to 40°C (32°F to 104°F) |